Suggestions on correctly use and maintain vacuum membrane press

With the development of society, vacuum membrane press has been widely used in wood working industry (such as veneer/laminated furniture,wooden door,wooden panels, etc ). How to maintain the vacuum membrane press has become the main theme today. Here's how to maintain it:1. Regularly check the parts of the vacuum membrane laminator to see if they are damaged. If damaged, replace them immediately; 2. Reasonably follow the instructions and rules for operation, and prohibit all improper operations.

Skills of vacuum membrane press uses vacuum technology to make the surface of building materials with special shapes stick exquisite decorative materials by gluing and heating, so that the decorative materials are very three-dimensional, like relief, so as to achieve the purpose of improving product performance and decoration. Its characteristic is that there is no need for molds and the covering and edge sealing are completed. What are the use skills of membrane press? Below are the use skills of vacuum membrane laminator

1. When the new machine starts to use, due to heating through the wire pressing nose, the original fastening nut may become loose due to thermal expansion. If it is not tightened for a long time, there may be poor contact and local overheating, causing local current to be too high and tripping, causing damage to the heating tube. It is recommended to tighten the thread pressing nut in a timely manner after the new machine cools down.

2. When starting production every day, the mobile table should be baked in the machine for 20-30 seconds before preheating, and then operated normally to ensure product stability.

3. The quality of the film coating is closely related to the quality of the adhesive, especially in winter construction in the north. The ambient temperature must be above 5 ℃, and the preheating and baking time should be appropriately extended, otherwise the edge may not stick. If you extend the time and increase the temperature, but still cannot stick, you can call us and recommend a reputable and inexpensive adhesive manufacturer in the industry. We recommend machines for heating up and down during winter production in the north.

4. In summer, the temperature is high and the humidity in the south is high. At this time, it is necessary to shorten the heating time appropriately, and it is particularly important to note that the intermediate time between the application of glue and the lamination process must not be too long.

5. Woodworking produces relatively large dust, so it is necessary to regularly clean the filter of the vacuum pump. Clean compressed air can be used to blow the removed filter element from the inside out

6, Using great quality silicone membrane from GC as the necessary consumption parts on the vacuum membrane press

Hot tags:vacuum membrane press, veneer, laminated furniture, wooden door, wooden panels, vacuum membrane laminator, silicone membrane, china, manufacturers, suppliers, factory, in stock