Views: 222 Author: Jasmine Publish Time: 2023-08-23 Origin: Site
Conveyor belt safety ought to be your top concern if your company uses automated conveyor systems in any form. The U.S. Bureau of Labor Statistics reports that conveyor accidents cause 9,000 injuries and over 40 occupational fatalities each year.
There are various conveyor belt risks to be aware of to help decrease injuries associated with conveyors, regardless of the type of conveyor being used in your company. Even though it's hard to prevent every mishap from happening in your warehouse or factory, there are a few useful conveyor safety guidelines to remember. In this post, we'll look at eight of the most important dos and don'ts for running automated conveyor systems.
Anything that is not securely secured, including long hair, body parts, and loose clothes, has the potential to become trapped on a conveyor belt and cause significant injury. Anyone working close to a conveyor should make sure their hair is pulled back and remove any jewelry, including rings, necklaces, watches, and bracelets. This is one of the most important conveyor safety regulations that you should put into practice. Additionally, workers who are near conveyors should be aware of their appendages and refrain from donning baggy garments.
On the conveyor belt, employees should never stand, sit, climb, or move around. Safety comes first, and even though these behaviors appear amusing, they are actually quite risky. People were not intended to climb or walk on conveyor belts. Even when conveyor pinch point guards have been placed, there are numerous pinch points in every conveyor system that might trap people or clothes and cause significant injury. Aside from the potential for injury, anyone using conveyors runs the risk of causing the belts to derail, which would harm the entire system.
According to legal requirements, conveyor systems must include a warning signal that can be activated before starting up. For businesses creating conveyor safety regulations out of concern for their workers, it ought to be just the start. The meaning of the warning signal and any potential risks that may arise if it is disregarded should be explained to employees.
For maintenance, workers or contractors may remove guards, exposing potentially hazardous machinery, chains, gears, and moving parts. Automated conveyor systems should always be secured when in use for the protection of employees, and they should only be turned back on when all conveyor pinch point guards and coverings have been successfully replaced.
Anyone working with conveyor belts should be familiar with where to locate the system's emergency stop and start controls. Employees will then be equipped to respond effectively in the case of crises or other issues.
Workers on automated conveyor systems should be aware that they should alert a supervisor right away if they experience any problems. Employees need to be taught the importance of reporting suspicious activity. It's always better to be safe than sorry, regardless of how small the problem may seem.
If your company uses conveyors, every employee should know how to operate them safely before starting work. All visitors should be informed on how to stay safe while they are in your facility, and current staff should undergo regular refresher training on conveyor safety guidelines.
Controls for conveyors should only be used by skilled personnel. You must periodically check your conveyor controls to ensure that nobody has unplugged, changed, or abused them. Teach your staff that the conveyor belt controls are a component of a bigger system and should not be altered without permission.
